中空玻璃打膠機的清洗非常重要，可以避免以下情況的發生：
Cleaning of hollow glass gluing machine is very important to avoid the following situations:
1.花膠的出現避免
1. Avoiding the appearance of gum
2.不出膠的問題
2. No glue problem
3.壓力跟不上的問題
3. The problem that pressure can't keep up with
中空玻璃打膠機分為全自動雙組份打膠機和半自動雙組份打膠機，兩種設備的清洗方法基本是一樣的。中空玻璃打膠機在使用完后，必須進行清洗，如果不及時清洗雙組份膠就會(huì )固化在輸膠管和打膠機中，影響以后的正常使用。
Hollow glass gluing machine is divided into automatic two-component gluing machine and semi-automatic two-component gluing machine. The cleaning methods of the two equipments are basically the same. After using the hollow glass glue beater, it must be cleaned. If the two-component glue is not cleaned in time, it will be solidified in the hose and glue beater, which will affect the normal use in the future.
打膠機的清洗根據下次使用時間的間隔分為兩種清洗方式，一種是日常清洗主要是每班結束后的清洗工作。還有一種是徹底清洗，主要是設備準備要空置，在本次使用完下次使用間隔時間比較長。這兩種清洗的方式是不一樣的。
The cleaning of glue beater can be divided into two ways according to the interval of the next use time. One is the daily cleaning mainly after the end of each shift. There is also a thorough cleaning, mainly equipment preparation to be vacant, in this use to the next use of a longer interval. The two cleaning methods are different.

一個班完成后，關閉黑膠輸送管和壓力開關，繼續輸出白膠，直到放出的膠里沒有一點黑顏色，再關閉白膠壓力開關，關閉白膠輸送開關，一個班的完工后清洗就完成了。
After the completion of a shift, close the black rubber conveyor pipe and pressure switch, and continue to output white glue until there is no black color in the released glue, then close the white glue pressure switch, turn off the white glue conveyor switch, after the completion of a shift cleaning is completed.
比較長時間（15天以上）需要將設備空置：在生產任務完成后，將壓力開關和輸送開關都關閉后，將膠槍拆卸下來用煤油清洗干凈，將輸送膠的管子拆卸下來，用空壓機的高壓空氣將管內的膠吹干凈。
For a long time (more than 15 days), the equipment needs to be empty: after the production task is completed, the pressure switch and the conveying switch are closed, the rubber gun is disassembled and cleaned with kerosene, the pipe for conveying glue is disassembled, and the glue in the pipe is blown clean with the high-pressure air of the air compressor.
雙組份打膠機廠家的小編為大家整理的內容就先給大家介紹到這里了，歡迎大家到我們官網：http://linshi.jncsjx.com，發表您的不同意見，謝謝大家的支持！
The small edition of the two-component glue machine manufacturer will introduce the contents to you first. Welcome to our official website: http://linshi.jncsjx.com, to express your different opinions. Thank you for your support.