全自動點膠機的控制和檢測系統是軟件和硬件的集成，是整個系統的核心所在，主要功能有：對被控制的各個子系統的運動性能進行調試，點膠時子系統初始參數的設置，協調各個子系統之間的工作，對子系統的工作狀態進行監測，工作氣壓和溫度數據的采集、傳送、處理等。
The control and detection system of the automatic dispenser is the integration of software and hardware, which is the core of the whole system. Its main functions include: debugging the motion performance of each subsystem controlled, setting the initial parameters of the subsystem during dispensing, coordinating the work of each subsystem, monitoring the working state of the subsystem, collecting the working pressure and temperature data Transmission, processing, etc.
全自動點膠機點膠過程持續較短，一般為幾十毫秒到幾秒鐘的時間，由于電磁閥為開關控制，因此要提高控制精度，只有縮短采樣周期進行實時測量，以及減少電磁閥的動作誤差的方法來具體實現。具體對控制系統的實現來說，就要求系統定時精度誤差能夠保證在ms級以下。這就對控制系統的實時性提出了很高的要求。因而智能點膠控制系統的核心技術之一就是如何完成這一高實時性的任務。
The dispensing process of automatic dispenser lasts for a short time, generally from tens of milliseconds to a few seconds. Because the solenoid valve is controlled by switch, the only way to improve the control accuracy is to shorten the sampling period for real-time measurement and reduce the action error of the solenoid valve. For the realization of the control system, the timing accuracy error of the system is required to be less than Ms. This puts forward a high demand for the real-time performance of the control system. Therefore, one of the core technologies of intelligent dispensing control system is how to complete this high real-time task.

在生產應用中常用到的驅動方式有：
In the production application, the commonly used driving methods are as follows:
1、同步帶傳動它也采用直流或交流伺服電機，通過同步帶將旋轉運動轉換為直線運動，廣泛應用在送料機構等場合。它適合長距離傳動，傳動的速度較高；但運動精度比較低，可承載的轉距較小。
1. Synchronous belt drive also uses DC or AC servo motor to convert rotary motion into linear motion through synchronous belt, which is widely used in feeding mechanism and other occasions. It is suitable for long distance transmission with high transmission speed; But the motion accuracy is low, and the carrying distance is small.
2、滾珠絲桿傳動這是目前應用廣、也成熟的一種傳動方式，采用直流或交流伺服電機驅動，選用大導程的絲桿時可以獲得較高的傳動速度，定位精度和重復定位精度高，高速度可達1m/s。
2. Ball screw drive is a widely used and mature transmission mode at present. It is driven by DC or AC servo motor. When large lead screw is selected, it can obtain higher transmission speed, high positioning accuracy and repeated positioning accuracy, and the high speed can reach 1m / s.
3、氣缸傳動這種傳動方式具有結構簡單、控制方便的特點；但由于其采用壓縮氣體作為動力，定位精度低，啟停速度慢，往復運動的頻率低。
3. The cylinder drive has the characteristics of simple structure and convenient control; But because it uses compressed gas as power, it has low positioning accuracy, slow start stop speed and low reciprocating frequency.
4、直線電機傳動這是目前逐漸興起的一種直線運動傳遞方式，具有結構形式簡潔，定位精度高，易于實現高速高精運動的控制。它直接將電能轉換成機械能，減少了滾珠絲桿、傳送帶、渦輪螺桿等中間轉換環節；但對直線電機的控制系統相當復雜，目前還不是很成熟，也相當昂貴，限制了它的廣泛使用。
4. Linear motor drive is a kind of linear motion transmission mode which is gradually rising at present. It has the advantages of simple structure, high positioning accuracy and easy to realize the control of high-speed and high-precision motion. It directly converts electric energy into mechanical energy, reducing the intermediate conversion links such as ball screw, conveyor belt and turbine screw; But the control system of linear motor is very complex, it is not very mature at present, and the price is also very expensive, which limits its wide use.