立式中空玻璃生產線一般會(huì )出現什么問題：
What problems usually occur in vertical insulating glass production line:
中空玻璃生產線有哪些故障，立式中空玻璃生產線就是用來加工制作中空玻璃的機械設備，一般包括中空玻璃清洗設備、合片設備和涂膠設備，那么在使用過程中難免會(huì )遇到故障，下面，我們就為大家介紹一下立式中空玻璃生產線常見的故障。
What are the faults of the insulating glass production line? The vertical insulating glass production line is the mechanical equipment used to process and make insulating glass, which generally includes insulating glass cleaning equipment, laminating equipment and gluing equipment. It is inevitable to encounter faults in the process of use. Next, we will introduce the common faults of the vertical insulating glass production line.
立式中空玻璃生產線方案
Vertical insulating glass production line solution

一、檢查分析
1、 Inspection and analysis
加熱指示燈亮、氣壓表正常，說明電氣供應正常。
The heating indicator light is on and the barometer is normal, indicating that the electrical supply is normal.
手動各電磁閥手動按鈕，都有相應動作，說明機械系統無故障;
All manual buttons of manual solenoid valves have corresponding actions, indicating that there is no fault in the mechanical system;
觀察所有急停按鈕，都在釋放狀態。
Observe that all emergency stop buttons are released.
檢查可編程序控股志氣，按下操作按鈕，可編程序控制*有相應的輸入顯示，但無輸出顯示。
Check the programmable control ambition, press the operation button, and the programmable control * has corresponding input display, but no output display.
此時將加熱時間、焊*時間分別設置為“0”值，并同時將各機頭開關關掉，使急停按鈕處于釋放狀態，發現可編程序控制*還有輸入指示燈亮。
At this time, set the heating time and welding * time to "0" value respectively, and turn off each head switch at the same time, so that the emergency stop button is released. It is found that the programmable control * and input indicator light are on.
結合中空玻璃設備電器原理圖和電氣接線圖，檢查輸入指示燈亮所對應的輸入接線端子，對應的輸入為左機頭急停按鈕的輸入。
Combined with the electrical schematic diagram and electrical wiring diagram of insulating glass equipment, check the input terminal corresponding to the input indicator light, and the corresponding input is the input of the emergency stop button of the left machine head.
打開左機頭急停按鈕，該按鈕外部處于釋放狀態，而內部觸點處于接通狀態。
Open the emergency stop button of the left handpiece. The external part of the button is in the release state and the internal contact is in the on state.
本文的精彩內容由全自動封膠線提供知識提供，本網站還有很多的精彩內容，更多的內容您可以點擊進入：http://linshi.jncsjx.com我們有專門的客服為您解答問題
The wonderful content of this article is provided by the full-automatic glue sealing line. There are many wonderful contents on this website. You can click to enter more contents: http://linshi.jncsjx.com We have special customer service to answer your questions