
打膠機出黑膠沒有壓力是怎么回事 ?
時間:2019-08-12 來源:http://www.whooo.net/ 發布人:昌盛機械
前兩天有客戶問小編,中空玻璃自動打膠機出黑膠但是沒有壓力是怎么回事。小編看見之后迅速和提問者取得聯系,幫助他解決了這個問題。小編想到還有很多人不知道這些問題的解決辦法,就去咨詢了雙組份打膠機的技術人員,下面就和大家也說說解決辦法。
Two days ago, a customer asked Xiaobian, hollow glass automatic gluing machine out of black glue, but no pressure is how it is. Xiaobian quickly contacted the questioner and helped him solve the problem. Xiaobian thought that there were many people who did not know the solution to these problems. He went to consult the technical staff of the two-component gluer. Now I will talk about the solution to these problems with you.
要檢查一下打膠機的氣源區間在不在0.6~0.8Mpa之間。這個如果沒在調好之后再試一下。如果本來就在這個區間,進行下一個步驟:
First, check that the air source of the glue beater is between 0.6 and 0.8 Mpa. If it's not ready, try again. If it's already in this area, take the next step:
看看觸屏中編輯功能菜單中的密封不使用選項是否打開;
See if the sealing option in the editing menu on the touch screen is turned on.
檢查開關,氣動開關是否阻塞;檢查黑膠氣動開關與電磁閥動作是否正常;
Check the switch, whether the pneumatic switch is blocked; check whether the black rubber pneumatic switch and solenoid valve operate normally;
檢查一下中空玻璃自動打膠機比例泵上的智能壓力表是否處在正常范圍,7~35Mpa。還是處于報警狀態。
Check whether the intelligent pressure gauge on the proportional pump of the hollow glass automatic gluing machine is in the normal range, 7-35 Mpa. It is still in the state of alarm.

檢查打膠機上的液壓站是否有壓力,如果沒有壓力的話:(1)清洗比例溢流閥。(2)檢查比例控制器是否正常通電又或者稍微松動。
Check whether there is pressure in the hydraulic station of the glue beater, if there is no pressure: (1) Clean the proportional relief valve. (2) Check whether the proportional controller is normally powered on or slightly loosened.
檢查一組比例泵下限傳感器是否有信號,檢查二組比例泵是否有信號,再檢查一下掃描儀數值是否正常。
Check whether the lower limit sensor of a group of proportional pumps has a signal, check whether the two groups of proportional pumps have a signal, and then check whether the scanner value is normal.
今天的精彩內容就暫且給大家介紹到這里了,歡迎大家百度搜索:雙組份打膠機,這樣可以找到我們,我們會(huì )定期發布更多的相關資訊,大家也可以直接收藏我們的官網:http://www.whooo.net!謝謝大家長久以來的支持!
Today's wonderful content will be introduced here for the time being. Welcome to Baidu Search: Two-component glue machine, so that we can find us, we will regularly release more relevant information, you can also directly collect our official website: http://www.whooo.net! Thank you for your long-standing support!
- 中空玻璃加工設備的合片段橫梁高低不平?這樣調,合片精準不跑偏 2026/01/11
- 中空玻璃加工設備板壓段卡殼?輪子走玻璃不走?這樣排查超高效 2026/01/10
- 中空生產線封膠線機頭立柱不平?這樣調整,封膠均勻不返工 2026/01/05
- 中空玻璃加工設備卡殼?液壓站不起壓?卡閥問題這樣解決超省心 2025/12/31
- 全自動封膠線卡殼?貼鋁條后玻璃不走、報警?這樣解決超簡單 2025/12/31
- 冬天中空玻璃生產線出輪子灰???這些日常難題解決辦法請收好 2025/12/30
- 全自動封膠線的“智能眼”——LOW-E識別儀,守護封膠質量的關鍵 2025/12/30
- 好用的全自動封膠線,都藏著這些關鍵特質 2025/12/27
- 雙組份打膠機,中空玻璃第二道密封的“精準調控專家” 2025/12/27
- 別讓施工疏漏毀了成品!中空玻璃質量問題,多與這幾點及加工設備相關 2025/12/26
產品分類Product categories
聯系我們Contact us
- 咨詢熱線:0531-85717458 13705446998
- 公司地址: 山東省德州市齊河安頭鄉企巢工業園
- 掃碼聯系我們:

當前位置:



