雙組份打膠機打膠不飽滿，要怎么？其實我們的雙組份打膠機出現這個問題，主要是有以下幾種情況導致的：
How to solve the problem of insufficient gluing of two-component gluing machine? In fact, the problem of our two-component glue punch is mainly caused by the following circumstances:
一、打膠速度過快
1. Gluing speed is too fast
有的客戶為了加快自己的生產節奏追趕生產計劃，將打膠速度認為調整的過快，導致膠體還沒有完全達到合格標準機頭就已經移動到下一個位置進行打膠操作了。
Some customers in order to speed up their production rhythm to catch up with the production plan, the gluing speed is considered to be too fast to adjust, resulting in the colloid has not fully met the qualified standard head has moved to the next position for gluing operation.
如果我們需要加快打膠的速度調整了打膠機的移動參數的話，那么我們對應的也應該對供膠系統也進行相應的設置，比如這時候我們就需要加大供膠壓力，增大打膠機的出膠速度來配合對象的移動速度的增加。
If we need to speed up the gluing speed and adjust the moving parameters of the gluing machine, then we should also set up the gluing system accordingly. For example, at this time, we need to increase the pressure of the gluing machine, increase the speed of the gluing machine to match the increase of the moving speed of the object.
如果我們僅僅是單獨的增加了打膠機的移動速度而沒有對壓力進行調節的話就很有可能出現打膠不飽滿的情況發生。
If we simply increase the speed of the glue machine without adjusting the pressure, it is likely that the glue will not be full.

二、供膠壓力不足
2. Insufficient supply pressure
這個情況其實在前一種情況的已經進行過描述了，即便你沒有對打膠機的移動速度進行調節也出現了打膠不飽滿的情況，那么也有可能是供膠壓力過小導致的。這時候我們僅僅需要調整供膠壓力即可的這個問題的發生。
In fact, this situation has been described in the former case. Even if you do not adjust the speed of the glue machine, there is a situation that the glue is not full, then it may also be caused by too little glue supply pressure. At this time, we only need to adjust the supply pressure to solve this problem perfectly.
三、機頭感應器損壞
3. Damage of nose inductor
這種情況非常的少見，但是也不排除這種情況的發生。在我們的打膠機機頭有一個對鋁條深淺進行探測的感應器，如果發現雙組份鋁隔條過深或者過淺的時候他會(huì )自動的調整移動的移動速度以及供膠壓力（自動調整幅度是小范圍內的）。如果我們的鋁條本身就深淺不一，在加上我們的感應器損壞的壞就會(huì )發生這種情況！
This situation is very rare, but it can not be ruled out. There is a sensor to detect the depth of aluminium bar in the head of our gluing machine. If it is found that the two-component aluminium bar is too deep or too shallow, it will automatically adjust the moving speed and the gluing pressure (the automatic adjustment range is small). If our aluminium bars are different in depth, this will happen if our sensors are damaged.
好了，今天的精彩內容就先給大家介紹到這里了，歡迎大家收藏我們的網站：http://linshi.jncsjx.com，我們將會(huì )定期更新更多的精彩內容！大家搜索關鍵詞：雙組份打膠機，這樣也可以找到我們！謝謝大家的支持！
Well, today's wonderful content is introduced to you first, welcome to collect our website: http://linshi.jncsjx.com, we will update more wonderful content regularly! Everyone searches for keywords: two-component glue machine, so you can find us! Thank you for your support!造成雙組份打膠機打膠不飽滿的原因有哪些？